GarGraves "Phantom Line" switches
GarGraves "Phantom Line" switches
#104
100" Radius "Phantom" manual switch w/ Tinplated outside rails
#114-RC
42" "Phantom" Remote Control Switch w/Tinplated outside rails
#143
O-72 "Phantom" Manual Switch w/Tinplated outside rails
#133-RC
54" "Phantom" Remote Control Switch w/Tinplated outside rails
GarGraves 100" turnout
GarGraves 100" turnout
Item: 103
O Gauge
Right Hand Turnout
MSRP: $59.95
GarGraves 100" radius turnout with Caboose ground throw for manual operation. This turnout is ideal for use between two mainlines, providing a 4.25" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 16" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 104
O Gauge
Left Hand Turnout
MSRP: $59.95
GarGraves 100" radius turnout with Caboose ground throw for manual operation. This turnout is ideal for use between two mainlines, providing a 4.25" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 16" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 103-RC
O Gauge
Right Hand Turnout
MSRP: $99.95
GarGraves 100" radius turnout with DZ-1000 switch machine for remote operation. This turnout is ideal for use between two mainlines, providing a 4.25" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: 16" on straight side
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 104-RC
O Gauge
Left Hand Turnout
MSRP: $99.95
GarGraves 100" radius turnout with DZ-1000 switch machine for remote operation. This turnout is ideal for use between two mainlines, providing a 4.25" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: 16" on straight side
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 105
O Gauge
Right Hand Turnout
MSRP: $62.95
GarGraves 100" radius turnout with Caboose ground throw for manual operation. This turnout is ideal for use between two mainlines, providing a 4.25" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 16" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 106
O Gauge
Left Hand Turnout
MSRP: $62.95
GarGraves 100" radius turnout with Caboose ground throw for manual operation. This turnout is ideal for use between two mainlines, providing a 4.25" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 16" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 105-RC
O Gauge
Right Hand Turnout
MSRP: $102.95
GarGraves 100" radius turnout with DZ-1000 switch machine for remote operation. This turnout is ideal for use between two mainlines, providing a 4.25" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: 16" on straight side
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 106-RC
O Gauge
Left Hand Turnout
MSRP: $102.95
GarGraves 100" radius turnout with DZ-1000 switch machine for remote operation. This turnout is ideal for use between two mainlines, providing a 4.25" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: 16" on straight side
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 1103
O Gauge
Right Hand Turnout
MSRP: $105.95
GarGraves 100" radius turnout with DZ-2500 switch machine for remote operation. This turnout is ideal for use between two mainlines, providing a 4.25" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 16" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 1104
O Gauge
Left Hand Turnout
MSRP: $105.95
GarGraves 100" radius turnout with DZ-2500 switch machine for remote operation. This turnout is ideal for use between two mainlines, providing a 4.25" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 16" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 1105
O Gauge
Right Hand Turnout
MSRP: $108.95
GarGraves 100" radius turnout with DZ-2500 switch machine for remote operation. This turnout is ideal for use between two mainlines, providing a 4.25" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 16" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 1106
O Gauge
Left Hand Turnout
MSRP: $108.95
GarGraves 100" radius turnout with DZ-2500 switch machine for remote operation. This turnout is ideal for use between two mainlines, providing a 4.25" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 16" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
GarGraves 42" turnout
GarGraves 42" turnout
Item: 113
O Gauge
Right Hand Turnout
MSRP: $59.95
GarGraves 42" diameter turnout with Caboose ground throw for manual operation. This turnout is ideal for use in yards where slow speed and a tight space is a concern. It provides a 4.25" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 9.58" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 114
O Gauge
Left Hand Turnout
MSRP: $59.95
GarGraves 42" diameter turnout with Caboose ground throw for manual operation. This turnout is ideal for use in yards where slow speed and a tight space is a concern. It provides a 4.25" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 9.58" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 113-RC
O Gauge
Right Hand Turnout
MSRP: $99.95
GarGraves 42" diameter turnout with DZ-1000 switch machine for remote operation. This turnout is ideal for use in yards where slow speed and a tight space is a concern. It provides a 4.25" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000 switch machine
Length: 9.58" on straight side
Can be wired for non-derailing operation
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 114-RC
O Gauge
Left Hand Turnout
MSRP: $99.95
GarGraves 42" diameter turnout with DZ-1000 switch machine for remote operation. This turnout is ideal for use in yards where slow speed and a tight space is a concern. It provides a 4.25" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000 switch machine
Length: 9.58" on straight side
Can be wired for non-derailing operation
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 115
O Gauge
Right Hand Turnout
MSRP: $62.95
GarGraves 42" diameter turnout with Caboose ground throw for manual operation. This turnout is ideal for use in yards where slow speed and a tight space is a concern. It provides a 4.25" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 9.58" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 116
O Gauge
Left Hand Turnout
MSRP: $62.95
GarGraves 42" diameter turnout with Caboose ground throw for manual operation. This turnout is ideal for use in yards where slow speed and a tight space is a concern. It provides a 4.25" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 9.58" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 115-RC
O Gauge
Right Hand Turnout
MSRP: $102.95
GarGraves 42" diameter turnout with DZ-1000 switch machine for remote operation. This turnout is ideal for use in yards where slow speed and a tight space is a concern. It provides a 4.25" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000 switch machine
Length: 9.58" on straight side
Can be wired for non-derailing operation
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 116-RC
O Gauge
Left Hand Turnout
MSRP: $102.95
GarGraves 42" diameter turnout with DZ-1000 switch machine for remote operation. This turnout is ideal for use in yards where slow speed and a tight space is a concern. It provides a 4.25" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000 switch machine
Length: 9.58" on straight side
Can be wired for non-derailing operation
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 1113
O Gauge
Right Hand Turnout
MSRP: $105.95
GarGraves 42" diameter turnout with DZ-2500 switch machine for remote operation. This turnout is ideal for use in yards where slow speed and a tight space is a concern. It provides a 4.25" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 9.58" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 1114
O Gauge
Left Hand Turnout
MSRP: $105.95
GarGraves 42" diameter turnout with DZ-2500 switch machine for remote operation. This turnout is ideal for use in yards where slow speed and a tight space is a concern. It provides a 4.25" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 9.58" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 1115
O Gauge
Right Hand Turnout
MSRP: $108.95
GarGraves 42" diameter turnout with DZ-2500 switch machine for remote operation. This turnout is ideal for use in yards where slow speed and a tight space is a concern. It provides a 4.25" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 9.58" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 1116
O Gauge
Right Hand Turnout
MSRP: $108.95
GarGraves 42" diameter turnout with DZ-2500 switch machine for remote operation. This turnout is ideal for use in yards where slow speed and a tight space is a concern. It provides a 4.25" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 9.58" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
GarGraves 54" turnout
GarGraves 54" turnout
Item: 133
O gauge
Right hand turnout
MSRP: $59.95
GarGraves 54" diameter turnout with Caboose ground throw for manual operation. It provides a 5.43" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 11.87" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 134
O gauge
Left hand turnout
MSRP: $59.95
GarGraves 54" diameter turnout with Caboose ground throw for manual operation. It provides a 5.43" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 11.87" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 135
O gauge
Right hand turnout
MSRP: $62.95
GarGraves 54" diameter turnout with Caboose ground throw for manual operation. It provides a 5.43" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: 11.87" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 136
O gauge
Left hand turnout
MSRP: $62.95
GarGraves 54" diameter turnout with Caboose ground throw for manual operation. It provides a 5.43" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 11.87" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 133-RC
O gauge
Right hand turnout
MSRP: $99.95
GarGraves 54" diameter turnout with DZ-1000 switch machine for remote operation. It provides a 5.43" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: 11.87" on straight side
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 134-RC
O gauge
Left hand turnout
MSRP: $99.95
GarGraves 54" diameter turnout with DZ-1000 switch machine for remote operation. It provides a 5.43" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: 11.87" on straight side
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 135-RC
O gauge
Right hand turnout
MSRP: $102.95
GarGraves 54" diameter turnout with DZ-1000 switch machine for remote operation. It provides a 5.43" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: 11.87" on straight side
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 136-RC
O gauge
Left hand turnout
MSRP: $102.95
GarGraves 54" diameter turnout with DZ-1000 switch machine for remote operation. It provides a 5.43" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: 11.87" on straight side
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof
Item: 1133
O Gauge
Right Hand Turnout
MSRP: $108.95
GarGraves 54" diameter turnout with DZ-2500 switch machine for remote operation. It provides a 5.43" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 11.87" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 1134
O Gauge
Left Hand Turnout
MSRP: $108.95
GarGraves 54" diameter turnout with DZ-2500 switch machine for remote operation. It provides a 5.43" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 11.87" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 1135
O Gauge
Right Hand Turnout
MSRP: $108.95
GarGraves 42" diameter turnout with DZ-2500 switch machine for remote operation. It provides a 5.43" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 11.87" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 1136
O Gauge
Left Hand Turnout
MSRP: $108.95
GarGraves 42" diameter turnout with DZ-2500 switch machine for remote operation. It provides a 5.43" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 11.87" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
GarGraves 72" Turnout
GarGraves 72" Turnout
Item: 143
O gauge
Right hand turnout
MSRP: $59.95
GarGraves 72" diameter turnout with Caboose ground throw for manual operation. It provides a 4.57" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 12.50" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 144
O gauge
Left hand turnout
MSRP: $59.95
GarGraves 72" diameter turnout with Caboose ground throw for manual operation. It provides a "4.57" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 12.50" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 145
O gauge
Right hand turnout
MSRP: $62.95
GarGraves 72" diameter turnout with Caboose ground throw for manual operation. It provides a 4.57" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 12.50" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 146
O gauge
Right hand turnout
MSRP: $62.95
GarGraves 72" diameter turnout with Caboose ground throw for manual operation. It provides a 4.57" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: 12.50" on straight side
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 143-RC
O gauge
Right hand turnout
MSRP: $99.95
GarGraves 72" diameter turnout with Caboose ground throw for manual operation. It provides a 4.57" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: 12.50" on straight side
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 144-RC
O gauge
Left hand turnout
MSRP: $99.95
GarGraves 72" diameter turnout with Caboose ground throw for manual operation. It provides a 4.57" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: 12.50" on straight side
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 145-RC
O gauge
Right hand turnout
MSRP: $102.95
GarGraves 72" diameter turnout with Caboose ground throw for manual operation. It provides a 4.57" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: 12.50" on straight side
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 146-RC
O gauge
Left hand turnout
MSRP: $102.95
GarGraves 72" diameter turnout with Caboose ground throw for manual operation. It provides a 4.57" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: 12.50" on straight side
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 1143
O Gauge
Right Hand Turnout
MSRP: $105.95
GarGraves 72" diameter turnout with DZ-2500 switch machine for remote operation. It provides a 4.57" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 12.50" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 1144
O Gauge
Left Hand Turnout
MSRP: $105.95
GarGraves 72" diameter turnout with DZ-2500 switch machine for remote operation. It provides a 4.47" center to center crossover.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 12.50" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 1145
O Gauge
Right Hand Turnout
MSRP: $108.95
GarGraves 72" diameter turnout with DZ-2500 switch machine for remote operation. It provides a 4.57" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 12.50" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 1146
O Gauge
Left Hand Turnout
MSRP: $108.95
GarGraves 72" diameter turnout with DZ-2500 switch machine for remote operation. It provides a 4.57" center to center crossover.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: 12.50" on straight side
Can be wired for non-derailing
DZ-2500 switch machine is TMCC/Legacy control capable when used with a DZ-2001 data driver.
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 141
O gauge
WYE turnout
MSRP: $59.95
GarGraves 72" diameter "wye" turnout with Caboose ground throw for manual operation.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: n/a
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 142
O gauge
WYE turnout
MSRP: $62.95
GarGraves 72" diameter "wye" turnout with Caboose ground throw for manual operation.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: manual
Length: n/a
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 141-RC
O gauge
WYE turnout
MSRP: $99.95
GarGraves 72" diameter "wye" turnout with DZ-1000 for remote operation.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: n/a
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 142-RC
O gauge
WYE turnout
MSRP: $102.95
GarGraves 72" diameter "wye" turnout with DZ-1000 for remote operation.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-1000
Length: n/a
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 1141
O gauge
WYE turnout
MSRP: $105.95
GarGraves 72" diameter "wye" turnout with
DZ-2500 for remote operation.
Specifications:
Running rails: Tinplated steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: n/a
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.
Item: 1142
O gauge
WYE turnout
MSRP: $108.95
GarGraves 72" diameter "wye" turnout with
DZ-2500 for remote operation.
Specifications:
Running rails: Stainless steel
*Center rail: "Phantom" black oxide on steel
Control: DZ-2500
Length: n/a
Can be wired for non-derailing
*Black center rails on all turnouts are made of cold rolled steel. They are not rust proof.