GarGraves Trackage

This is our Accessories list. Feel free to browse to find what you're looking for! A complete wood ties pricelist for Flex Track, Switches & Accessories can be found here.

[Signals & Controls] [Ground Throws] [Miniature Lamps] [Switch Controllers & Terminal Panels]
[Rix Products] [Switch Machines] [Circuitron Electronics] [Roadbed] [Miscellaneous]
[Track Connectors] [Specialty Tracks] [Z Stuff]

Retrofit your older GarGraves, Curtis Hi-Rail or Ross switches with the DZ-1000 Switch Machine Kit, by Z-Stuff For Trains!

You can also order Gar Graves Remote Control (R/C) Switches, Factory Equipped with the DZ-1000 Switch Machine!

Remote Switches Include a 6 foot wiring harness.

DZ-1000 Switch Machine Kit
(wire not included)

Special 3-Conductor Flat Wire for use with the DZ-1000 Switch Machine Kit:

Item #3CW22-1 100' Spool

Acme Switch Controllers

These Acme switch control panels are available with indicator lights to operate a single switch. You can order them for flush mounting IN a panel or with a mounting frame for mounting ON a panel. (As shown at right.)

We also carry the Acme Push-Button Panels and Switch Light Panels.

Caboose Industries
Manual Ground Throws

These are very handy to use on your Gar Graves switches, especially those that are within easy reach from your control panel.

See this in action in our video!

Item #913

Advertise GarGraves Track on your layout with this little gem!

Add a little life to that dark corner of your layout with this lighted, flashing billboard! It tells the simple message that GarGraves "Phantom" Line Track is, "The Track Trains Love Best."

Item #LBBGG
Lighted, Flashing GarGraves Billboard

Specially Made Mating Pins!

Connect Gar Graves Track with O-Gauge Tubular Track:

Item #801
O-Gauge Mating Pins

Connect Gar Graves Track with O-27 Track:

Item #802
O-27 Gauge Mating Pins

Connect sections of Gar Graves Track:

Item #803
GarGraves Mating Pins

Big Cut-Off Wheels from Gyro

These BIG 2 INCH cut-off wheels and matching mandrel will fit your Dremel Tool. These larger disks are ideal for cutting Gar Graves rail when fitting up your track.

See this in action in our video!

Item #93108 Disks
Item #83985 Mandrel

Always wear eye protection when cutting rail.

NJ International O-Gauge
Grade Crossing Flasher Signal

No. 3090

NJ International
O-Gauge Signals

We carry the complete line of NJ International Signals!

Semaphores, Color Light Signals, Position Light Signals, 3-Light Signals, Searchlight Signals and Dwarf Signals!

	NJ International Signals & Controls
3000	Semaphore 3-light O-scale
3020	Type D Color light signal 2-light with relay box O-scale
3030	Type D Color light signal 3-light O-scale
3040	8 Position light signal PRR/LIRR type O-scale
3050	Tri-Color signal type G Hooded target O-scale
3060	Tri-Color double signal Type G Hooded target O-scale
3080	Type D Color light signal 2-light O-scale
3090	Crossbuck signal O-scale
3100	Ground signal 2-light O-scale
3110	Ground signal 3 light O-scale
3200	SA Type Searchlight Target signal 1 light O-scale
3220	SA Type Searchlight Target signal 3-light O-scale

Gar Graves Track Solderless Connectors

Use these solder-less connectors and you'll never have to solder a wire to your Gar Graves Track again! These connectors press up into the web of the rail from the bottom of the rail, making a clean, tight electrical contact. Clip your wire into the clip and you're done! It's easy!

See these installed in our video!

Items #911 and 912-1 shown

	Caboose Industries Ground Throws
913	Ground Throw #208S--Sprung for O-Gauge .280" Travel
914	Ground Throw #101R--Rigid for HO-Gauge .190" Travel
915	Ground Throw #202-S--Sprung for HO-Gauge .190" Travel
916	Ground Throw #105R--Rigid for N-Gauge .135" Travel
917	Ground Throw #206S--Sprung for N-Gauge .135" Travel
918	Ground Throw #107R--Rigid for O-Gauge .280" Travel
919	Ground Throw #103R--Rigid for HO-Gauge .190" Travel
920	Ground Throw #204S--Sprung for HO-Gauge .190" Travel
921	Ground Throw #109R--Rigid Stand for HO .190" Travel
922	Ground Throw #210S-- Sprung Stand for HO .190" Travel
923	Ground Throw #111R--Rigid Stand w/SPDT Contacts .165" Travel
924	Ground Throw #212S--Sprung Stand w/SPDT Contacts .165" Travel
925	Ground Throw #113R--Rigid Stand w/SPDT Contacts .165" Travel
926	Ground Throw #214S--Sprung Stand w/SPDT Contacts .165" Travel
927	Ground Throw #115R--Rigid Stand w/SPDT Contacts .165" Travel
928	Ground Throw #216S--Sprung Stand w/SPDT Contacts .165" Travel

	Miniature Lamps - Screw Base
1499	Lamp - Clear - 14 volt
1400A	Lamp - Amber - 14 volt
1400B	Lamp - Blue - 14 volt
1400G	Lamp - Green - 14 volt
1400R	Lamp - Red - 14 volt
1500	Lamp - Clear - 18 volt
1500A	Lamp - Amber - 18 volt
1500B	Lamp - Blue - 18 volt
1500G	Lamp - Green - 18 volt
1500R	Lamp - Red - 18 volt
	Acme Switch Controllers & Terminal Panels for All Gauges
	Acme Terminal Strips
1416	16 Clip Terminal strip
1516	16 Clip Terminal strip with switch
	Switch Controller With Indicator Lights
1498	Switch Controller with lights (Flush mount)
1444	Switch Controller with lights & Surface Mounting Frame
	Indicator lights controlled by Internal Electro-Mechanical switch
1894	Switch Controller with lights (flush mount)
1888	Switch Controller with lights & surface mounting frame
	Switch Control Panels for Flush Mounting w/o lights
1301	To operate 1 switch machine
1302	To operate 2 switch machines
1303	To operate 3 switch machines
1304	To operate 4 switch machines
1305	To operate 5 switch machines
1306	To operate 6 switch machines
1307	To operate 7 switch machines
1308	To operate 8 switch machines
1816	To operate 16 switch machines
	Switch Control Panels with Mounting Frame w/o lights
1401	To operate 1 switch machine
1402	To operate 2 switch machines
1403	To operate 3 switch machines
1404	To operate 4 switch machines
1405	To operate 5 switch machines
1406	To operate 6 switch machines
1407	To operate 7 switch machines
1408	To operate 8 switch machines
1916	To operate 16 switch machines

Rix Products

The RIX RAX

Under table mounting bracket (Vertical)

See this in action in our video!

628-1 . . . . . . . . . . . . . . . . . . . . . $3.49 each

628-4

Twin coil switch machine (2 sets of contacts)

628-5

Under table mounting bracket (Horizontal)

628-6

Under layout pivoting turnout linkage

628-7

Mounting pad for switch machine

N J International Switch Machines & Accessories

6002

Throw springs (Pkg/2)

6003

Under Layout mounting kit (Pkg/2)

6004

Switch machine wiring connectors with 15' 3-conductor wire

Circuitron Electronics

800-6000

Tortoise Switch machine - See this in action in our video!

800-5302

PS-2 12-volt constant DC output power supply

800-5303

Snapper switch machine power supply for twin coil switch machines

800-5102

Alternating flasher for crossbuck signals

800-5103

Alternating flasher 3 outputs for crossbuck signals

800-9999

Catalog & Application book

Midwest Cork Roadbed

3016

O-Gauge Roadbed, 25 pieces per box, 75 feet, 3' x 5mm

3013

HO- Gauge Roadbed, 25 pieces per box, 75 feet, 3' x 5mm

3019

N-Gauge Roadbed, 25 pieces per box, 75 feet 3' x 3mm

3014

O & HO Sheets (box of 9) 5" x 36" x 5mm

3020

N-Gauge Sheets (box of 10) 3-1/4" x 36" x 3mm

Miscellaneous

801

O-27-Gauge mating pins Lionel to GarGraves

802

O-Gauge mating pins Lionel to GarGraves

803

GarGraves track pins (Nickel Silver)

804

Ties Bundle/12 (Specify Gauge & with or without slots

805

Momentary contact push button switch

806-25

Track Screws, #4 x 3/8" Phillips Pan Head Black

806-5

Track Screws, #4 x 3/8" Phillips Pan Head Black

806-1

Track Screws, #4 x 3/8" Phillips Pan Head Black

807-25

Track Screws, #4 x 1/2" Phillips Pan Head Black

807-5

Track Screws, #4 x 1/2" Phillips Pan Head Black

807-1

Track Screws, #4 x 1/2" Phillips Pan Head Black

808-25

Track Screws, #4 x 3/4" Phillips Pan Head Black

808-5

Track Screws, #4 x 3/4" Phillips Pan Head Black

808-1

Track Screws, #4 x 3/4" Phillips Pan Head Black

809-25

Track Screws, #4 x 1" Phillips Pan Head Black

809-5

Track Screws, #4 x 1" Phillips Pan Head Black

809-1

Track Screws, #4 x 1" Phillips Pan Head Black

905

Zone Razor Saw #35-200

907

Super FybRglass Eraser AB-0002 (E-101)

908

Refill for FybRglass Eraser AB-0010 (E-103) Course

83985

GYROS 1/8" Mandrel for use with disks in Dremel Tool

93108

GYROS Reinforced Cutoff disks 2" diameter

Stainless Steel Solderless Track Connectors

909-1

Stainless Connectors, 2 #909 & 1 #910-1

909

Stainless Connector for Outside Rails

909-B

Stainless Connector for Outside rails Bulk

910-1

Stainless Connector for Center Rail O-Gauge

910-2

Stainless Connector for Center rail Standard Gauge

910-1B

Stainless Connector for Center rail O-Gauge Bulk

910-4

GarGraves "Fit-Up" Blades (Strip track connectors) - See this in action in our video!

Tinplated Steel Solderless Track Connectors

911-1

Tinplated Connectors 2 #911 & 1 #912-1

911

Tinplated Connector for Outside Rails

911-B

Tinplated Connectors for Outside Rails Bulk

912-1

Tinplated Connector for Center Rail O-Gauge

912-2

Tinplated Connector for Center Rail Standard Gauge

911-B

Tinplated Connectors for Outside Rails Bulk

Specialty Tracks

Here's Our
Terminal & Accessory
Control Section

Tired of soldering wires to your GarGraves track to connect track feeders? Now it's as easy as 1-2-3... wires that is! Just connect track power to the center terminal and ground to one or both of the outer terminals, and you're done! Track is 6.5" long.

Item #111	Phantom Tinplate
Item #112	Phantom Stainless
Item #211	Regular Tinplate
Item #212	Regular Stainless

This track section can also be used to control trackside accessories like the Flagman or Crossing Gates!

Here's Our Uncoupler!

Here's our innovative uncoupler with an extended magnetic field to eliminate the need to have the coupler EXACTLY on top of the magnet to work properly! The Controller with wire is included. Track is 6.5 " long.

Item #107

Our Uncoupler/Unloader!

Here's our new Uncoupler/Unloader Track with the same powerful extended field magnetic uncoupler plus FOUR operating rails to operate automatic cars and magnetic couplers. The Controller with wire is included.

Track is 10.25" long.

Item #108

**"Phantom Line" Uncoupling/Operating Tracks**
107	Remote Control Magnetic Uncoupling section "Phantom" Tin
108	Remote Control Magnetic UC/UL for operating cars "Phantom" Tin
109	Remote Control Magnetic Uncoupling Section "Phantom" Stainless
110	Remote Control Magnetic UC/UL for operating cars "Phantom" Stainless

**Regular Line Uncoupling/Operating Tracks**
207	Remote Control Magnetic Uncoupling section Tinplated rails
208	Remote Control Magnetic UC/UL for operating cars Tinplated rails
209	Remote Control Magnetic Uncoupling section Stainless rails
210	Remote Control Magnetic UC/UL for operating cars Stainless rails